Friday, September 14, 2012

Vmware VM import Failed to open disk scsi0:0: Unsupported and/or invalid disk type 7. Did you forget to import the disk first?Unable to create virtual SCSI device for scsi0:0, Module DevicePowerOn power on failed.


Resolution

This issue occurs if a virtual machine that is meant for VMware Hosted products such as VMware Workstation, VMware Player or VMware Fusion is powered-on on a VMware ESX host.

The underlying format used to store virtual machines on VMware Hosted products differs from the format used to store virtual machines on VMware ESX hosts.

To import a virtual machine stored on a VMware Hosted product to a VMware ESX host, the virtual machine should first be converted using VMware vCenter Converter. For more information on conversion, see the VMware vCenter Converter documentation.
Why this happen to me :
This error comes when thin provisioned VMDK file is imported as new vm from backup, or clone VM.

Solution

Reimport the VM using the "zeroedthick"
How to :-
Connect to the ESX host using an SSH session or ILO/DRAC to use this command.
Go to /vmfs/volumes/yourdatastore/

and then give the following command

vmkfstools -i Ubuntu-server.vmdk -d zeroedthick Ubuntu-server1.vmdk

after that remove Ubuntu-server.vmdk and rename Ubuntu-Server1.vmdk to Ubuntu-Server.vmdk and continue the process of import it will work.

"zeroedthink" a flat file of full size is created. ( not thin provisioned)


Sunday, January 01, 2012

Dapatkan DUIT dari Ziddu

Ziddu adalah Free Unlimited File Hosting. Anda dapat menyimpan file anda di Ziddu secara GRATIS dan kemudian menyebarkannya di internet. Kita bisa upload file kita yang akan di share (di bagi) dengan orang lain. Dimana orang lain tersebut nantinya bisa men-download file yang kita upload tadi.
Bagi Anda yang ingin mengupload file-file seperti file dokumen, file word, e-book, mp3, pdf, gambar atau file apapun ke internet saya merekomendasikan Anda menggunakan fasilitas dari Ziddu.
Anda bebas menyimpan file-file yang ingin Anda sebarkan di internet tanpa dibatasi kuota. Setelah Anda meng upload file di Ziddu akan diberikan link download dimana Anda dapat menyebarkan link download file Anda tersebut. Anda dapat meng-copy link download tersebut yang kemudian dapat anda paste di blog anda, di Friendster atau Facebook anda.




Paijo sedang sibuk : “Kenapa harus Ziddu ?, bukannya ada banyak file hosting yang lebih baik di internet sana ?.”
Topan : “Selain 100 % gratis, dan Unlimited disk space (bisa upload file sebanyak mungkin), Kelebihan dari Ziddu adalah kamu akan DIBAYAR ketika file yang kamu simpan di Ziddu ada yang mendowloadnya. Begitu Jo !!.
Paijo sedang sibuk : “Jangan sok tahu lo kamu pan !.”
Topan : “Biarin daripada kamu sok sibuk.”

Berikut perinciannya:
Anda akan DIBAYAR $0.001 jika ada yang 1 kali men downloadnya. Jika di akumulasikan akan seperti ini..

10000 Unique Downloads: $10 USD
50000 Unique Downloads: $50 USD
100000 Unique Downloads: $100 USD
500000 Unique Downloads: $500 USD
1000000 Unique Downloads: $1000 USD

Bonus juga akan diberikan jika Anda merekomendasikan orang lain untuk menggunakan Ziddu sebesar $0.10 Dolar. Nantinya Anda akan diberikan link refferal oleh Ziddu. Nanti akan saya beritahu caranya.

Ziddu akan mengirimkan pendapatan Anda setelah mencapai 10 dolar. Awal bulan April 2009 yang lalu saya menerima pembayaran pertama saya dari Ziddu. Begitu senangnya perasaan saya pada waktu itu.

Anda berminat?
Silakan daftar gratis Ziddu disini. (REF)

1. Setelah masuk, Isikan nama, email, password serta verifikasi kode kemudian klik “submit”.

2. Kemudian anda akan di giring ke halaman baru, di sana anda di minta untuk upload file pertama anda. pilihlah file yang anda pilih kemudian upload.

3. Jika anda tidak langsung masuk ke halaman upload, maka anda bisa mencoba untuk login dengan email dan password yang telah anda buat tadi. kemudian setelah login cobalah untuk upload file pertama anda.

4. Setelah selesai upload maka akan ada link file yang tadi anda upload, nah di sana ada URL yang bisa anda sebarkan di blog, forum, friendster maupun facebook agar orang lain download file tersebut. Oleh karena itu upload saja hal-hal yang bagus dan berguna seperti software, gambar e-book atau MP3. (Mungkin MP3 akan banyak yang akan men-download.)

Setelah itu ada banyak menu yang bisa anda lihat di sana seperti penghasilan anda, file anda, semuanya ada di pilihan toolbar.

Cara mendapatkan link refferal :
Setelah anda login, cobalah untuk melihat di bawah dan klik pada tulisan “refferal banner”, kemudian di sana anda akan mendapatkan link refferal Anda. Sebarkan saja link tersebut di forum, blog, friendster maupun facebook selain itu anda juga bisa mendapatkan kode banner yang bisa anda pasang di mana saja.

Pembayaran Anda akan di transfer melalaui Paypal.
Jika anda belum mempunyai account Paypal dan ingin mengetahui bagaimana cara membuat account Paypal klik Apa itu Paypal dan cara membuat Paypal.

OK.
Semoga bermanfaat.

Saturday, December 10, 2011

Dapat Duit Dengan Freakshare

Melihat perkembangan bisnis online di internet semakin lama semakin pesat.pertanda bahwa bisnis online mempunyai prospek baik kedepannya.malam ini saya mencoba sharing mengenai bisnis online di file hosting.dalam hal ini saya membahas file hosting di freakshare.net.sudah pada tahu kan tentang freakshare.net?.memang di internet banyak sekali situs penyedia file hosting seperti halnya ziddu,mediafire,megaupload,2shared,4shared,dll.namun untuk mendapatkan penghasilan di file hosting,saya rekomendasikan di freakshare.net.ada apa ya?,kenapa ngga ziddu aja?kan udah terbukti membayar dollar.menyikapi pertanyaan tersebut,ziddu sekarang sudah mulai menurun pelayannya.saya sering mengalami error saat download di ziddu dan banyak pop-up bermunculan [maaf ya gan file download-an ane sementara ini masih di ziddu ].
Yap,untuk kedepannya ane usahain pindahin semua ke file hosting yang lebih baik [kalau sempet ].tentunya di freakshare.net.freakshare merupakan alternative lain mendapatkan keuntungan dari setiap file yang didownload dan mengikuti program affiliasinya.tergantung agan maunya yang mana?dua-duanya juga malah lebih bagus.komisi yang kita peroleh dari freakshare bukanlah mata uang $dollar,melainkan €Euro.wow,,malah lebih mantabb lagi gan.detailnya

Earn up to 40 € for 1000 Downloads.
For every advertised Premium Account you earn 1 €
We pay you 10% from the money earned from affiliates who you referred to our Service [1 € = $ 1,22]
min upload 5MB/file,PayOut min 20€Euro [Paypal]

Nah gimana gan,seru kan.daftarnya gratiss,,tiss,,tiss dan tidak membatasi dari negara mana saja boleh kok.Sedikit Tips dari ane: gimana caranya dapetin €€ dengan mudah dan cepat?.pertama,posting keforum-forum besar gan.seperti kaskus danlebih cepetnya lagi gabung di forum luar yang jumlah membernya paling banyak.biasanya di forum negara indya [belasan juta member],china[puluhan juta member,hanya saja bahasanya ngga ngerti kanji semua].dan untuk file yang paling laku didownload adalah file video Por*n* gan :-p .intinya,sebarkan link download freakshare kamu sebanyak-banyaknya dan sertakan file gambar yang menarik pada saat posting,gunanya untuk memancing downloader.biar cepet laku file kita gan .ya sudahlah ngga usah lama-lama lagi deh gan,mending langsung join dan upload filenya+mari berburu Euro bersama-sama.tenang aja gan,gratis sepanjang masa.

Wednesday, June 08, 2011

OpenFiler 2.99

Summary

This is part 1 in a proof of concept serious involving the creation of a RAID 1 iSCSI Target using OpenFiler 2.13 and Vmware Server 2. We will purposely fail one of the virtual disks in the array rebuild the array and verify the data. In part one of the series we will create the Raid 1 array. In subsequent parts we will create an ISCSI Target, connect Windows Vista using iSCSI Initiator and simulate RAID 1 drive failure and recovery. The OpenFiler vmware appliance is free to download and use. The installation of both Vmware Server 2 and OpenFiler 2.13 vmware appliance will not be covered here.
Create VMware virtual disks

From the VMware Server 2 web administration create two 50 MB disks for the OpenFiler VMware guest accepting the VMware defaults.
Create Raid Partitions

As seen in Figure 1, navigate to openfiler > Volumes > Block Devices and select the first of our newly created disks /dev/sdb.

FIGURE 1: opefiler > Volumes > Block Devices



Create a RAID array partition by selecting Partition Type: “RAID array member” for the entire cylinder range (default) and clicking “Create”. See Figure 2. The resulting RAID partition should like as seen in Figure 3. Repeat the previous steps to create a RAID partition for /dev/sdc


FIGURE 2: opefiler > Volumes > Block Devices > /dev/sdb



FIGURE 3: openfiler > Volumes > Block Devices > /dev/sdb


Create New Raid 1 Array

Once the two raid devices have been created navigate to openfiler > Volumes > Software Raid as seen in Figure 4 below. Select RAID-1 from the drop down menu, leave the chunk size at default, select the two raid devices as seen in Figure 4 and click “Add array”. The resulting raid array information will be displayed as seen in Figure 5.

Figure 4: openfiler > Volumes > Software Raid



Figure 5: openfiler > Volumes > Software Raid


Create New Volume Group

Navigate to openfiler > Volumes > Volume Groups and create the new volume group “volgroupraid001”. If this is not your preferred volume group naming convention, change it to your liking. After entering your “Volume group name”, select our newly created Raid 1 volume /dev/md0 and click “Add volume group” as seen in Figure 6. The resulting Volume Group is displayed as seen in Figure 7.

Figure 6: openfile > Volumes > Volume Groups



Figure 7: openfiler > Volumes > Volume Groups


Create New Volume

Navigate to openfiler > Volume>Add Volume select our “volgroupraid001” volume group, enter the name our new volume “volraid001”, fill in a description, enter the Required Space” (32MB) and be sure to select the proper “Filesystem Type” of iSCSI. Click “Create” when ready. See Figure 8 below. The resulting Volume Group will be as seen in Figure 9.

Figure 8: openfiler > Volume > Add Volume

Figure 9: openfiler > Volumes > Manager Volumes



In our next section we will create the OpenFiler iSCSI Target using our newly created RAID 1 volume.

OpenFiler 2.99 - Attempted to Create Software Raid 1 Array - Failed...

Heres the code you need to get RAID1 working on Openfiler 2.99:

You need to type the following commands into the shell.

Code:
conary update mdadm=openfiler.rpath.org@rpl:devel/2.6.4-0.2-1

This will install the correct mdadm files, once installed type the next command in.

Code:
ln -s /sbin/lvm /usr/sbin/lvm

This ensures that the GUI is populated correctly.
This will then allow you to create all of the software RAID types without issue.

I extracted this info from here: http://www.everything-virtual.com/?p=349

Friday, April 01, 2011

Dionea - Honeypot

Copy N Paste from
http://networkdefense.com.au/2010/06/12/first-experiences-with-dionaea/
After a lot of reading, a few very late nights, and a fair bit of indecision I decided to install Dionaea. It was down to mwcollectd or Dionaea as my next choice for a 30 day test, but I had quite a few issues getting mwcollectd running properly. I think this is mostly due to my lack of experience compiling stuff in linux, and also not understanding what to do when things fail or don't compile as expected. So I moved on and began to follow Markus' extensive Dionaea install documentation.

My first few attempts failed, in epic fashion. Initially for some unknown reason I decided to install Python 3 from testing... even though the documentation says to compile it. This brought up issues with sqlite3, again frustrating but a good learning experience. Follow the doco! In the end I had to make a slight modification to the ./configure script when compiling Dionaea, as Cython was not being found. Other than that the install was very smooth. I installed Dionaea under Debian 64bit, chose KDE graphical install and left the 'Standard System' and 'Desktop Environment' options checked.

I thought it would be a good idea to post the steps I took to install Dionaea, not sure if it is of use to anyone else. It's basically just a rehash of Markus' documentation.

1. Stuff from APT
apt-get install libglib2.0-dev libssl-dev libcurl4-openssl-dev libreadline-dev libsqlite3-dev python-dev libtool automake autoconf build-essential subversion git-core flex bison pkg-config

2. gettext / glib
apt-get install gettext
wget http://ftp.gnome.org/pub/gnome/sources/glib/2.20/glib-2.20.4.tar.bz2
tar xfj glib-2.20.4.tar.bz2
rm glib-2.20.4.tar.bz2
cd glib-2.20.4/
./configure --prefix=/opt/dionaea
make
make install
cd ..

3. liblcfg
git clone git://git.carnivore.it/liblcfg.git liblcfg
cd liblcfg/code
autoreconf -vi
./configure --prefix=/opt/dionaea
make install
cd /usr/local/src

4. libemu
git clone git://git.carnivore.it/libemu.git libemu
cd libemu
autoreconf -vi
./configure --prefix=/opt/dionaea
make install
cd ..

5. libnl (optional)
git clone git://git.kernel.org/pub/scm/libs/netlink/libnl.git
cd libnl
autoreconf -vi
export LDFLAGS=-Wl,-rpath,/opt/dionaea/lib
./configure --prefix=/opt/dionaea
make
make install
cd ..

6. libev
wget http://dist.schmorp.de/libev/Attic/libev-3.9.tar.gz
tar xfz libev-3.9.tar.gz
rm libev-3.9.tar.gz
cd libev-3.9
./configure --prefix=/opt/dionaea
make install
cd ..

7. Cython
wget http://cython.org/release/Cython-0.12.1.tar.gz
tar xfz Cython-0.12.1.tar.gz
rm Cython-0.12.1.tar.gz
cd Cython-0.12.1
python setup.py build
python setup.py install

8. sqlite3
apt-get install sqlite3

9. Python 3.1.2
wget http://python.org/ftp/python/3.1.2/Python-3.1.2.tgz
tar xfz Python-3.1.2.tgz
rm Python-3.1.2.tgz
cd Python-3.1.2/
./configure --enable-shared --prefix=/opt/dionaea --with-computed-gotos \
--enable-ipv6 LDFLAGS="-Wl,-rpath=/opt/dionaea/lib/"
make
make install
cd ..

10. libxml2-dev
apt-get install libxml2-dev

11. libxslt1-dev
aptitude install libxslt1-dev

12. lxml
wget http://codespeak.net/lxml/lxml-2.2.6.tgz
tar xfz lxml-2.2.6.tgz
rm lxml-2.2.6.tgz
cd lxml-2.2.6
/opt/dionaea/bin/2to3 -w src/lxml/html/_diffcommand.py
/opt/dionaea/bin/2to3 -w src/lxml/html/_html5builder.py
/opt/dionaea/bin/python3 setup.py build
/opt/dionaea/bin/python3 setup.py install
cd ..

13. udns
wget http://www.corpit.ru/mjt/udns/udns_0.0.9.tar.gz
tar xfz udns_0.0.9.tar.gz
rm udns_0.0.9.tar.gz
cd udns-0.0.9/
./configure
make shared
cp udns.h /opt/dionaea/include/
cp *.so* /opt/dionaea/lib/
cd /opt/dionaea/lib
ln -s libudns.so.0 libudns.so
cd /usr/local/src

14. Curl & C-ares
wget http://c-ares.haxx.se/c-ares-1.7.3.tar.gz
tar xfz c-ares-1.7.3.tar.gz
cd c-ares-1.7.3
./configure --prefix=/opt/dionaea
make
make install
cd ..

wget http://curl.haxx.se/download/curl-7.20.0.tar.bz2
tar xfj curl-7.20.0.tar.bz2
rm curl-7.20.0.tar.bz2
cd curl-7.20.0
./configure --prefix=/opt/dionaea
make
make install
cd ..

15. libpcap
wget http://www.tcpdump.org/release/libpcap-1.1.1.tar.gz
tar xfz libpcap-1.1.1.tar.gz
rm libpcap-1.1.1.tar.gz
cd libpcap-1.1.1
./configure --prefix=/opt/dionaea
make
make install
cd ..

16. Dionaea (with my own changes on the Cython line from '/usr/local/bin' to '/usr/bin')
git clone git://git.carnivore.it/dionaea.git dionaea

cd dionaea
autoreconf -vi

./configure --with-lcfg-include=/opt/dionaea/include/ \
--with-lcfg-lib=/opt/dionaea/lib/ \
--with-python=/opt/dionaea/bin/python3.1 \
--with-cython-dir=/usr/bin \
--with-udns-include=/opt/dionaea/include/ \
--with-udns-lib=/opt/dionaea/lib/ \
--with-emu-include=/opt/dionaea/include/ \
--with-emu-lib=/opt/dionaea/lib/ \
--with-gc-include=/usr/include/gc \
--with-ev-include=/opt/dionaea/include \
--with-ev-lib=/opt/dionaea/lib \
--with-nl-include=/opt/dionaea/include \
--with-nl-lib=/opt/dionaea/lib/ \
--with-curl-config=/opt/dionaea/bin/ \
--with-pcap-include=/opt/dionaea/include \
--with-pcap-lib=/opt/dionaea/lib/ \
--with-glib=/opt/dionaea

make
make install

Running Dionaea
cd /opt/dionaea/bin/
./dionaea -l all,-debug -L '*'

Within moments of launching Dionaea connection attempts began pouring in, mostly rejected attempts. After around 30 minutes the first sample was received along with some interesting colours flying past - looking forward to going through the logs later this evening. Now all that's left to do is get the p0f ihandler turned on. So far things are looking promising.

Getting Dionaea up and running has been a great experience. I've learned a lot about compiling, dependencies, issues, and Debian in general. I'm very keen to see what kind of information it can produce over the coming month.

- Cooper

*update: 27th November 2010 - Updated Dionaea Install Instructions

Friday, March 25, 2011

Metasploit Framework

Installation on Ubuntu Linux

The Metasploit Framework is well-supported on the Ubuntu platform. The following instructions should also apply to Kubuntu, Xubuntu, and Debian.

If these instructions do not work for your version of Ubuntu, please try the Generic Linux instructions instead.
Dependencies

Install the Ruby dependencies:
$ sudo apt-get install ruby libopenssl-ruby libyaml-ruby libdl-ruby libiconv-ruby libreadline-ruby irb ri rubygems


Install the Subversion client:
$ sudo apt-get install subversion

In order to build the native extensions (pcaprub, lorcon2, etc), the following packages need to be installed:
$ sudo apt-get install build-essential ruby-dev libpcap-dev

Metasploit Framework

Once the dependencies have been installed, download the Unix tarball from the download page and run the following commands:
$ tar xf framework-3.X.tar.gz
$ sudo mkdir -p /opt/metasploit3
$ sudo cp -a msf3/ /opt/metasploit3/msf3
$ sudo chown root:root -R /opt/metasploit3/msf3
$ sudo ln -sf /opt/metasploit3/msf3/msf* /usr/local/bin/

When you've completed this step, you should have a working installation and be able to run modules, pivot through compromised systems, and use most of the Metasploit Framework's features. The following optional installation steps will give you extra functionality.
Database Configuration (optional)
Now that the framework is installed, you'll want to configure a database connection, and enable the Metasploit Framework to connect to it:
For postgres, see postgres_setup (recommended)
For mysql, see mysql_setup
For sqlite, see sqlite_setup (not supported!!).
Extensions (optional)

The Metasploit Framework includes a few native Ruby extensions that must be compiled in order to use certain types of modules.

To enable raw socket modules:
$ sudo apt-get install libpcap-dev
$ sudo bash
# cd /opt/metasploit3/msf3/external/pcaprub/
# ruby extconf.rb
# make && make install


To enable WiFi modules:
$ sudo bash
# cd /opt/metasploit3/msf3/external/ruby-lorcon2/
# svn co http://802.11ninja.net/svn/lorcon/trunk lorcon2
# cd lorcon2
# ./configure --prefix=/usr && make && make install
# cd ..
# ruby extconf.rb
# make && make install
Updates

The Metasploit Framework is updated daily with the latest exploits, payloads, features, and bug fixes. To update your installation of the Metasploit Framework:
$ sudo svn update /opt/metasploit3/msf3/


This can also be installed into the root user's crontab:
$ sudo crontab -e -u root # enter the line below
1 * * * * /usr/bin/svn update /opt/metasploit3/msf3/ >> /var/log/msfupdate.log 2>&1

Baru Beli 3D Printer? Ini 10 Laman Web untuk Cari Model 3D Percuma

 Sejak mula menggunakan Bambu Lab P2S Combo , antara soalan pertama yang bermain dalam kepala saya ialah: “Dekat mana nak cari benda menarik...